The multi-function control valve can perform more functions on the same valve body, for example, as an anechoic check valve, an on-off valve, a balance valve, and a measuring valve. The valve features a unique V-shaped seat that allows the valve to have good adjustability. The use of multi-function valves can reduce your installation time, reduce installation space, and save on procurement costs and labor costs.
Flange dimensions to EN1092-2, ANSI B16.1 Class 125
Medium: 0 °C ~ 100 °C water
Housing material: ductile iron / stainless steel, core rod: stainless steel, O-ring: EPDM
Working pressure: 175PSI, 10Bar/ 235PSI, 16Bar / 350PSI, 25Bar
Size range: 2"~20"
The pump diffuser combines filters, elbows, end suction stabilizers, etc., saving installation space and procurement costs. The built-in guide vane makes the fluid more stable, and the start protection filter is installed to prevent foreign matter from entering the pump. The filter has a larger flow area than the conventional filter, and the filter has an opening ratio of 63%.
Flange dimensions to EN1092-2, ANSI B16.1 Class 125
Medium: 0 °C ~ 100 °C water
Housing material: Ductile iron, Filter: Stainless steel, O-ring: EPDM
Working pressure: 175PSI, 10Bar/ 235PSI, 16Bar / 350PSI, 25Bar
Size range: 2"~20"
The detonation flame arrester is a flame arrester used to prevent the flame from passing at supersonic speed or supersonic speed.
Nominal diameter:1/2"~24"
Nominal pressure: 10bar~40bar
Working temperature: ≤480℃
Explosion-proof grade: IIA、IIB、IIC
Standard of execution: ISO16852《International standard for arrester test》
Model is designed to vent to atmosphere to protect your tank frpm damage created by over-pressure or excessive vacuum.
Nominal diameter: 1"~16"
Nominal pressure: 16bar, 25bar
Working temperature: ≤200℃
Applicable medium: oil and chemical products.
Body material: WCB / stainless steel / aluminum alloy
Acceptance criteria: API2000
Adopting low-resistance Y-shaped structure design, the valve throttle plug adopts P-type or V-shaped structure, which is more conducive to the linear adjustment of the balance valve. The flow test joints at both ends have good self-sealing properties, easy commissioning, high-precision spool design and sealing performance to ensure measurement accuracy and durability.
Housing material: bronze, bonnet: stainless steel, handwheel: ABS resin
Working pressure: 350PSI /25Bar, BSPT or NPT thread
Size range: 1/2" to 2"
Designed with low-resistance Y-shaped structure, the front end of the measuring point is a one-line maintenance ball valve equipped with a 50mm extension pipe joint. The flow test joints at both ends have good self-sealing properties, easy commissioning, high-precision spool design and sealing performance to ensure measurement accuracy and durability.
Housing material: ductile iron, hand wheel: Nylon nylon
Working pressure: 235PSI, 16Bar /350PSI, 25Bar, ANSI or BSEN flange
Size range: 21/2" to 20"
